Medium Voltage Calculations

The most complete tool to support the calculation of high voltage electrical installations.

Free sections:

- Determination of the characteristics of the equipment: rated voltage (Ur), withstand at industrial frequency (Ud), withstand type of lightning (Up), short-term current (Ik)

- Sizing of low and medium voltage insulated cables (≤ 30 kV)

- Calculation criteria for admissible current, voltage drop, short circuit and protection, consideration of different factors for reducing the admissible current: temperature, thermal resistivity of the ground, grouping, sun exposure, etc.

- Multiple installation methods: tray, buried, under pipe, in the air ...

- Visualization of protection relay trip curve and MV cable admissible current

- Protection with transformer limiting fuses

- Earth fault current calculation (isolated neutral and earth)

- PE conductor

- Transformer performance and voltage drop

- Primary/secondary conversions in voltage and current transformers

- Secondary of a transformer acoording to switch position

- Calculation of the transformation center ventilation needs

- Five safety rules

- Consult ANSI codes electrical protections

- Tray sizing

- Representation of 1 IEC curve

- Parameter configuration

Voltages, frequency, conductivity of the conductor material, temperature

MV specific: list type, cable bundle (flat / staggered)

Regulation of LV protections

- Possibility of sharing results

Purchases In-App:

- Calculation of short circuits and impedances with the maximum and minimum values, type diagram with the following configuration: Network, Transformer, MV line, LV line

- Selection of voltage and current transformers (protection and measurement), capacitor bank of the transformer, calculation of the number of insulators

- Protection and adjustment of the transformer overcurrent relay, selectivity with low voltage switch (Ir, Isd, Ii), graph of the actuation curves and identification of characteristic points

- Calculation of medium voltage line (short line model, single circuit) with conductors: AL1 / ST1A (LA), AL1 / S20SA (LARL), AL3 / ST1A (DA), AL3 (D)

- Dimensioning and checking of protective and service grounding installation, system configuration, calculation of Howe parameters, step and contact voltages, distance between grounding, single grounding, additional safety measures and results checking

- Representation of up to 3 curves with different voltage levels

- Removal of ads with any purchase made

IN NO CASE SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES AS A RESULT OF THE CORRECT OR INCORRECT USE OF THE APPLICATION

Attribution icon:

Icons made by smalllikeart from www.flaticon.com